Encapsulating and Staking UV Silicone

NOVAGARD® Silicones UV cured encapsulating compounds impart excellent insulation properties, vibration dampening and barrier protection against weather and severe environmental conditions. Available as low viscosity fluids, semi-flowable viscous liquids and thixotropic pastes Novagard has a product to meet any application need. If necessary, a moisture curable component provides for shadow curing in any area unexposed to the ultraviolet light source. Often it is desirable to salvage or reclaim damaged or defective devices; Novagard UV-cured silicones may be selectively removed with relative ease allowing for quick repairs and re-potting.

Potential Applications

  • Power supplies, relays, high voltage resistors
  • Industrial controls, transformers, amplifiers
  • Sensors and connectors
  • General potting applications

Ultra-Violet Systems

  • Exceptionally fast UV cure ; Room temperature curing
  • Minimal UV energy requirements; Little or no heat generated so parts remain cool
  • Process or package a part immediately; No racking
  • Cure up to 5/8” (16 mm) of material 10 times faster than other well known brands
  • No oxygen inhibition ; No corrosive by-products
  • Excellent dielectric properties

UV/Moisture Dual Cure

  • Cures upon exposure to either a UV light source or atmospheric moisture
  • Dual cure continues to build strength and adhesion after the initial UV cure cycle
  • Moisture cure eliminates shadow effects on complex parts
  • Neutral, non-corrosive secondary cure system will not harm sensitive components
  • Excellent dielectric properties
  • Solvent Free / 100% solids – no VOC’s to handle or report