Silicone For Solar / Photovoltaic Assembly

Novagard Solutions offers a broad range of silicone-based materials to best meet the specific needs of solar / photovoltaic module assembly. As a custom manufacturer, Novagard Solutions will work with your engineers to maximize production capabilities and profitability in the solar energy industry.

Protective Coatings Used in Solar Energy Panel Assembly

Novagard Solutions UV stable and moisture resistant protective coatings provide excellent durability, high transparency and abrasion resistance. Viscosity, cure speed and other processing parameters may be adjusted to best match your solar production needs.

PRODUCT NAMECURE CHEMISTRYFEATURES & BENEFITS
200-257Moisture Cure-Room Temperature Curing
-Moisture Cure for Shadow Areas

Silicone Grease and Dielectric Compounds for the Solar Panel / Energy Industry

Novagard Solutions offers silicone grease and compounds for a variety of lubrication and protection applications. Non-curing, non-melting and extremely resistant, these materials maintain consistency from -50 F to 400 F.

PRODUCT NAMECURE CHEMISTRYFEATURES & BENEFITS
G330MMethyl-alkyl/soap thickened-Excellent moisture resistance
-Best lubricity and load-bearing
-Odorless and nearly non-volatile
-Oxidation resistant
G661Polydimethyl Siloxane-Excellent moisture resistance
-Electrically insulating
-Odorless and nearly non-volatile
-Rubber and plastic lubrication
-Chemically inert
-Oxidation resistant
G624Polydimethyl Siloxane-Excellent moisture resistance
-Electrically insulating
-Odorless and nearly non-volatile
-Rubber and plastic lubrication
-Oxidation resistant
-Meets Mil Spec 8660 / SAE-AS-8660

Single-component Bonding and Sealing for the Solar Industry

Novagard Solutions offers a broad range of stable UV and moisture resistant bonding and sealing alternatives. Single-component, moisture-cure systems provide relatively simple and reliable processing. Our UV cured materials provide the fastest processing speeds available with no oxygen inhibition and no special requirements for material transport. All of these materials provide long-lasting protection and long-term weathering performance. Silicone sealants and adhesives provide the best environmental resistance of any material. For frame and junction box sealing, or any application that requires protection against moisture and mechanical / thermal shock resistance or thermal conductivity select from the list below, or ask about a customized solution.

PRODUCT NAMECURE CHEMISTRYFEATURES & BENEFITS
500-100
500-150
Moisture Cure (alkoxy)-Primerless adhesion: aluminum, polycarbonate, glass, steel
-Non-sag rheology
-Excellent dielectric properties
-Room temperature curing
-Solvent free formulations
-No corrosive byproducts
-UL rated (94 HB pending)
- 105 C RTI
500-940 (white)
500-942 (black)
Moisture Cure (oxy-mod)-Primerless adhesion: aluminum, polycarbonate, glass, steel
-Non-sag rheology
-Excellent dielectric properties
-Room temperature curing
-Solvent free formulations
-No post cure required
-UL rated (94 V0)
800-305UV Cure / Dual Cure-Exceptionally fast UV cure
-Non-sag rheology
-No oxygen inhibition
-Room temperature curing
-Solvent free formulations
-No corrosive byproducts
-Moisture cure for shadow areas
800-400UV Cure / Dual Cure-Exceptionally fast UV cure
-Non-sag rheology
-No oxygen inhibition
-Room temperature curing
-Solvent free formulations
-No corrosive byproducts
-UL rated (94 HB pending)

Two-component Deep Section Potting and Encapsulating

Novagard Solutions provides a wide selection of two-component materials for potting and encapsulating applications. These are addition cure products, so there are no by-products eliminated during cure, which means minimal shrinkage and no corrosive out gassing. Optically clear, translucent or opaque products with out-standing durability and weather resistance these materials provide long-lasting protection.

PRODUCT NAMECURE CHEMISTRYFEATURES & BENEFITS
600-170Addition Cure / Platinum-Wide range of compatibility
-Low shrinkage
-No exotherm during cure
-Low viscosity
- 1:1 volume mix ratio
-Excellent dielectric properties
-Constant cure rate
-No solvents or cure byproducts
-No post cure required
-UL rated (94 V0 pending)